PT-4 Track Type Simple Manual Portal Crane
|FOB Price:||US $7,000 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $7,000/ Piece|
|Payment Terms:||L/C, T/T|
- Model NO.: PT-4
- Condition: New
- Maximum Lifting Height: 30-40m
- Main Girder Form: Single Girder
- Capacity: 500kg
- Length: Adjustable
- Capacity Range: 500kg-5ton
- Transport Package: Plastic Cloth
- Origin: Beijing, China
- Certification: GS, CE, ISO9001
- Operation Form: Air Operation+Ground Operation
- Maximum Lifting Weight: <20t
- Type: Beam
- Moving Way: Wheel
- Installation: 15 Cm Thick Reinforced Concrete Ground
- Trademark: LYFOOCRANE
- Specification: CE
- HS Code: 84253190
In many places, especially some confined place, where the general overhead crane or gantry crane is not applicalbe, the manual gantry crane is a very useful sololution. It is a light duty, easy installation, easy operation equippment.
1, long warranty period - 1 years warranty
2, professional design, strong strength
3, five times safety factor, high safety
4, user-friendly design, operation, transportation simple and light
5, put load in accurate place
6, short term delivery
7, easy disassembly and assembly, easy maintenance
8, improve work efficiency
PT4 type track gantry crane is also known as light gantry crane, weighing up to 5000 kilograms, usually by hanging crane is not possible or the local economy can be easy to use. The Longmen type crane can be simply split into several parts that are easy to transport and can be assembled quickly where another is used. The crane can be installed in any ordinary 15 cm thick reinforced concrete on the ground, not to put pressure on the roof structure of the building, can be buried in the underground orbit and orbit plane, make the ground flat, without affecting the other mobile trolley. Using a standardized modular design structure, you can easily expand as the work cell center expands. The design of truss type main girder can span 10m.
1,Easy to install, moving install and enlarge
2, compared with the traditional beam cranes, closed rail design, transportation, the use of force is only one-third of the use
3, the design of truss rail makes the span larger and the installation layout more flexible
Lifting capacity up to 5000kg, a variety of rail models and span
Prefabricated standard modular design makes expansion and mounting easier
Can be installed on any ordinary 15 cm thick reinforced concrete floor
Closed rail design reduces contamination of dirt and dirt
Steel fixed rail is more conducive to load positioning
The rail formed by high strength cold rolling has light weight, high precision, smooth rolling surface, and reduces the resistance of trolley wheel
The utility model has wide applicability and can be applied in many material transportation environments
It's very economical for a single unit of work
Easy installation reduces installation time and cost
It can increase the satisfaction of operators
Implementing a secure operating environment
By improving production efficiency, rapid return on investment can be achieved
The beam height can be rasied to different height. It is very useful when certain area has some low roof. As a result, you do not have to buy different cranes or tools. We provide 3 type of height adjusted gantry: Lever raising; Winch raising and Turbine raising model.
1. Lever raise model:
Two(2) levers are installed on both side, and it is more compact and convinient to raise the beam. It is most popular among our clients.
2.Winch raise model:
By using 2 sets of winch on both side of the leg, the beam can be raised by different height accoring to the requirement.
3. Turbine raise model:
This is a patend designing from our company, and it is the only designing among our competitors all around the world. The raising is precisely by mm and can be raised to any point according to the site situation. In many cases, the user can raise the beam as close as possible to the roof, then, give a maximum of lift height than any other lifting equippment.
Assemble and Disamemble
1. Bolt connection
All loose parts are connected by high-strength bolts. 2 worker can assemble them at site easily.
2. Nut embeded design
Ground beam has a nut embeded designing. This makes the assemble work very simple. All bolts and nuts are matched perfectly.
3. Span alternative
Clinet can order differnet span of beams to meet the same legs. It can be assembled according to different working site.
4. Other features
Heavy-Duty Casters: Four-position, swivel-lock casters with moldon polyurethane wheels for excellent floor protection.