• Wire Rope Hoist for Crane with Ce Certification 1t 2t 5t 10t 15t
  • Wire Rope Hoist for Crane with Ce Certification 1t 2t 5t 10t 15t
  • Wire Rope Hoist for Crane with Ce Certification 1t 2t 5t 10t 15t
  • Wire Rope Hoist for Crane with Ce Certification 1t 2t 5t 10t 15t
  • Wire Rope Hoist for Crane with Ce Certification 1t 2t 5t 10t 15t

Wire Rope Hoist for Crane with Ce Certification 1t 2t 5t 10t 15t

Application: Double Beam Crane, Gantry Crane, Bridge Crane, Tower Crane, Single Grinder Crane, Lifting Platform, Small Crane
Type: Electric Hoist
Sling Type: Wire Rope
Lift Speed: 2~8m/min
Maximum Lifting Height: 10m
Chain Falls: 1
Customization:
Diamond Member Since 2013

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
NLD
Certification
CE, ISO9001:2000
Condition
New
Color
Blue
Capacity
7.5 Ton
Transport Package
Wooden Box
Specification
CE
Trademark
LYFOOCRANE
Origin
China
HS Code
84253100
Production Capacity
30, 000 Units Units

Product Description

CD1 Single Speed Hoist

CD1 Wire Rope Hoist (also called monorail hoist) uses 1 hoisting conic motor as the lifting power, after 1st and 2nd reducer system,  turn 1380 RPM to a 8m/min lifting speed.

Lifting Speed: 8m/min
Lifting height: 6-100m


Designing Concept 

We foucs on "Maximum Safety" on the designing, and specially choose parts from the market.  We DONOT pursuit light weight, econical Janpan "extreme limitation" designing in order for  optimaztion designing. 
The drum adopts seamless pipe, not foundry pipe.  The foundtry drum is easy to be deformed becasue of the grinding between drum and rope guide.  The user has to deassemble the hoist and make repalcement which increases the cost.  Our sealess drum make the rope guide replacing easily.

The reducer gears and shaft are all made by our factory workshop with material of 20CrMnTi or 40Cr with heat treatment.  The roughpart of gears are forged by our own mould.    We DONOT make gears by the way of "unchange firber orientationuse" of Carbon steel or bar roughpart. 
Except electrics, bearing and standard parts, all other parts are made by ourself.   Our "self processing capability" guarantee the quality of the product.
 
 
Product Description
   Wheel: Follows "JB/T6392.2" rules, forged by adopting 45# carbon steel. Surface hardness is 300-380HB,  and the hardness bellow 15mm is 260HB.
   Reducer: The accurancy of the gears is not less than degree 8-8-7 of GB10095 rules. The travelling speed can be 20m/min, 30m/min, 45m/min and 75m/min.
   Dring motor: Conic motor of ZDY seriers is adopted.  With the best supplier of "Nanjin Motor", this motor can meet "busy starts, busy brake, busy reverse" operation. On the back o fthe motor, there is a adjustable bolt, which can adjust the brake torque. 
 
 
Safety Factor
   Each hoist is load tested by 1.25 times of static and 1.1 times of dynamic loading test before delivering
   The wire rope we adopted is 3 time safety factor at least
   Pedal limist switch & counter-weight limit switch give protection for lifting
   Pedal limit switch gives lowering protection
   Overload device prevent demage loading
 

Send your message to this supplier

*From:
*To:
avatar Mr. Alan
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now