Gold Member Since 2013
Audited Supplier
Lyfoo Industry Co., Ltd.

5ton Wire Rope Hoist, Single Girder Wire Rope Hoist, Electric Wire Rope Hoist manufacturer / supplier in China, offering Material Lifting and Handling Equipment with High Quality Low Price, Minin Jib Crane 24V Truck Pick up Crane, Permanent Magnet Manual Lifter- 1000kg (JG-1000) Easy Use and so on.

(/ )

Supplier Homepage Product Electrical hoist Material Lifting and Handling Equipment with High Quality Low Price

Material Lifting and Handling Equipment with High Quality Low Price

FOB Price: US $1 / Piece
Min. Order: 1 Piece
Min. Order FOB Price
1 Piece US $1/ Piece
Get Latest Price
Production Capacity: 20000 Unit/Year
Transport Package: Wooden Box
Payment Terms: L/C, T/T

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: CD1
  • Application: Construction Usage, Workshop Usage, Container Usage, Mineral Area Usage
  • Sling Type: Wire Rope
  • Power Source: Electric
  • Installation: Assembled
  • Condition: New
  • Voltage: 380V/400/415/440V 50/60Hz 3pH
  • Capacity: 1ton
  • Travel Speed: 20 M/Min
  • Lift Height: 6-30m
  • Hosit: CD/Md
  • Specification: CE, GS, ISO
  • Type: Double Beam Crane
  • Tower Crane Type: Under Slewing Cranes
  • Main Girder Form: Single Girder
  • Moving Type: Fixed
  • Certification: ISO9001: 2000, CE
  • Color: Green or Blue
  • Span: 7.5-22.5m
  • Lift Speed: 8/0.8 M/Min
  • Work Duty: A3-A5
  • Rail: 24kg/M
  • Trademark: zhongyuan shengqi
  • Origin: Henan, China
Product Description
CD1 Single Speed Hoist
CD1 Wire Rope Hoist uses 1 hoisting conic motor as the lifting power, after 1st and 2nd reducer system,  turn 1380 RPM to a 8m/min lifting speed.
Designing Concept
We foucs on "Maximum Safety" on the designing, and specially choose parts from the market.  We DONOT pursuit light weight, econical Janpan "extreme limitation" designing in order for  optimaztion designing.
The drum adopts seamless pipe, not foundry pipe.  The foundtry drum is easy to be deformed becasue of the grinding between drum and rope guide.  The user has to deassemble the hoist and make repalcement which increases the cost.  Our sealess drum make the rope guide replacing easily.
The reducer gears and shaft are all made by our factory workshop with material of 20CrMnTi or 40Cr with heat treatment.  The roughpart of gears are forged by our own mould.    We DONOT make gears by the way of "unchange firber orientationuse" of Carbon steel or bar roughpart.
Except electrics, bearing and standard parts, all other parts are made by ourself.   Our "self processing capability" guarantee the quality of the product.
Product Description
Wheel: Follows "JB/T6392.2" rules, forged by adopting 45# carbon steel. Surface hardness is 300-380HB,  and the hardness bellow 15mm is 260HB.
Reducer: The accurancy of the gears is not less than degree 8-8-7 of GB10095 rules. The travelling speed can be 20m/min, 30m/min, 45m/min and 75m/min.
Dring motor: Conic motor of ZDY seriers is adopted.  With the best supplier of "Nanjin Motor", this motor can meet "busy starts, busy brake, busy reverse" operation. On the back o fthe motor, there is a adjustable bolt, which can adjust the brake torque.
Safety Factor
Each hoist is load tested by 1.25 times of static and 1.1 times of dynamic loading test before delivering
The wire rope we adopted is 3 time safety factor at least
Pedal limist switch & counter-weight limit switch give protection for lifting
Pedal limit switch gives lowering protection
Overload device prevent demage loading
Send your message to this supplier
Avatar
Miss Susy Su
*From:
To: Miss Susy Su
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

Find Similar Products By Category