5t Suspension Overhead Crane with Hoist

• Certification: CE, ISO9001
• Condition: New
• Operation Form: Crane Console
• Maximum Lifting Height: 25-30m
• Maximum Lifting Weight: <20t
• Main Girder Form: Single Girder
• Model NO.: LX
• Type: Double Beam Crane
• Lifting Height: 6-30m
• Power Source: Electric
• Sling Type: Wire Rope
• Application: Workshop Usage
• Power Supply: 380V/400/415/440V 50/60Hz 3pH
• Transport Package: Strong Wooden Box
• Specification: Alloy Steel
• Trademark: LYFOO
• Origin: China

Product Description

5TON CHAINA Suspension Overhead Crane With Hoist

1. Introduction
The LX type single girder suspension overhead crane is a light duty crane. This type of crane is mainly used in the location where is no possible install columns to support the overhead crane. The end trucks of the underslung bridge crane ride on the bottom flange of the I-beam. Typically, an underhung I-beam is suspended from the roof of the building and is available only on lighter capacities, not more then 10 tons. Capacity of 0, 5-10 tons, span 3-16m, lifting height 6-30m,

It is good for working environment within working temperature between -25C- +40C. Prohibited to use in locations, where are stocks of flammable, explosive and corrosive materials.

LXB series of explosion-proof electric single girder overhead crane with flameproof, explosion proof electrical control boxes and other equipment supporting the use of a light rail running small crane.

Some Technical Parameter:

Capacity	0.5t~20t
Span	4.5m~30m
Lift height	6m~12m
Lifting Speed	7m/min
Cross Travel Speed	20m/min
Long Travel Speed	20m/min or 30m/min
Work Duty	A3(Equal to m2)
Controlled by	Pendant/Radio
Power Supply	380v/400/415v/460v

Safety feature:

1. Limit switch.
2. Overload stop device for hoisting.
3. Long bearing buffer for crane traveling.
4. Power faliure backup.

Notice: As this kind of crane is customized, in order to offer you most suitable design and solution, please confirm following information when you send inquiry.

1. Lifting capacity.
2. Span length. (rail center to rail center)
3. Lifting height. (hook center to ground)
4. Do you need bus bar, rail from us?
5. Local power supply 380V 50Hz 3P?
6. Working condition: What goods to lift?
7. Drawings of working place would be appreciated.

Here I list our major products for your reference, please check:
1. LH/QD model double girder overhead crane.
2. MH model single girder gantry crane.
3. MG model double girder gantry crane.
4. BMH semi gantry crane.
5. BZ model pillar mounted jib crane.
6. CD/MD electric hoist.
7. Crane spare part: Wheels/Motors/Hook block/Control panel/Coiling block.
8. Others like Mini Cable hoist, Manual Gantry Crane,Mini Construction Crane