Hot metal overhead crane
1) 14 months warranty
2) Capacity: 50t-650t/120t
3) Span 5m-50m
4) Free spare parts for 6 months
5) Lifting height 42 m
6) working duty A6-A8.
1. Introduction
YZ type hot metal overhead crane special designed for a steel factory. We offer Hot Metal Ladle crane, which is technologically advanced, and high in functioning. Normally there are four beams and two trolleys assembled on the crane, laminated ladle hook is equipped on the main trolley for lifting the ladle, and Aux trolley is for overturning the ladle and other assistant handing. The electrical appliance is installed inside of the main girder with heat insulation device and cooling device, the crane can work efficiently under harsh conditions such as high temperature and dust-laden.
All parts of the mechanical and electrical equipment are designed so that they are easily accessible from permanent service platforms for adjustment, lubrication, inspection, maintenance and repair.
Can be build double girder or four girders. This crane used 8 wheel series when the lifting capacity is over 63t, double motor and four braking system.
This crane model recommended by the WTO and match technical standard GB/T14405-93.
1. The quality of the main girder decides use age and use cost of the crane. "shengqi" consummately adopt European most advanced design and manufacture craft of the main girder. Mail girder wear well , not only let user ease use, but also low maintenance cost.
2. The up camber curve of main girder adopt optimize 4 times curve, ensure traveling have no upgrade resistance when full loading. Overcome the disfigurement of traveling motor overload traveling and trolley slide traveling.
3. End carriage is box girder, and the connection between end carriage and main girder adopt high strength bolt, in order to transport conveniently.
4. Optimize structure design, bearing layout reasonable , bear horizontal force, improve use age of the bearing.
5. The connections of every mechanical part are gears, in order to achieve simple installation and convenient maintenance. The drive wheel group and driven wheel group are all supported on crescent bearing box , convenient for disassembly and adjust.
Some Technical Parameter
| Capacity |
50t-650t/120t |
| Span |
5m-50m |
| Voltage |
380V/50Hz/3, Can Be Customized |
| Height |
20/22m |
| Max Lifting height |
42 m |
| working duty |
A6-A8 |
please contact us with detailed indormation to help us prepare you a better solution
1) the capacity
2) the lifting height(from the ground to the hook center)
3) We would like to know the span of the crane you need. (the distance between the rail center on each side)
4) Also we need to learn the heights from the ground to the rail and the rail to your top
Audited Supplier 
){kind=link}
){kind=link}