Single girder bridge crane (1-20t)
Brief Introduction:
Single girder overhead crane is a kind of material lifting equipment which was hung on the top of the workshop, ware house and stock ground. Both of its ends are located on tall concrete pillars or metal stents. The bridge structure lies and runs on both sides of the elevated track, This type crane can take full advantages under bridge space of lifting materials and not hindered by ground equipment It's owns the largest number used lifting machinery.
LD type electric single girder overhead cranes is the most commen crane. It has the advantage of light deadweight, little material, low price, easy control and convenient amending. LD type single beam electric bridge crane was recommended by WTO and apply to China standard JB/T1306-94.
LD type single girder electric crane can be divided into three parts as follow:
1. Steel structure inclueds main beam and end truck
2. Lift equipment, CD/MD or chain hoist. LD crane could have one or two speed.
3. Crane traveling mechanism: Two end carriages with wheels driven by electric motor.
LYFOO Crane possesses the following features:
1. The quality of the main girder decides use age and use cost of the crane. "shengqi" consummately adopt European most advanced design and manufacture craft of the main girder. Mail girder wear well , not only let user ease use, but also low maintenance cost.
2. The up camber curve of main girder adopt optimize 4 times curve, ensure traveling have no upgrade resistance when full loading. Overcome the disfigurement of traveling motor overload traveling and trolley slide traveling.
3. End carriage is box girder, and the connection between end carriage and main girder adopt high strength bolt, in order to transport conveniently.
4. Optimize structure design, bearing layout reasonable , bear horizontal force, improve use age of the bearing.
5. The connections of every mechanical part are gears, in order to achieve simple installation and convenient maintenance. The drive wheel group and driven wheel group are all supported on crescent bearing box , convenient for disassembly and adjust.
Specification:
1. Capacity range: 0.5-20 ton.
2. Span length: 6-32m
3. Lifting height: 7.5-32m
4. Electric hoist: CD/MD Model.
5. Motors: Nanjing Zongchang (Best in China. )
6. Power supply: 380V/50Hz or as per client's requirement.
Some Technical Parameter
| Crane traveling mechanism |
Performance parameters |
| |
1-5t |
10t |
| Traveling Speed (m/min) |
20 |
20 |
| Reduction Ratio (i) |
38 |
38 |
| Motor |
type |
YES |
| power |
2×0.4 |
2×0.8 |
| Rotational speed |
1200 |
| Working System |
A5 |
| Power supply |
3phrase 380V 50Hz |
| Wheel diameter |
Ф200 |
| Width of Track |
37-70mm |
Safety feature:
1. Limit switch.
2. Overload stop device for hoisting.
3. Long bearing buffer for crane traveling.
4. Power faliure backup.
Notice: As this kind of crane is customized, in order to offer you most suitable design and solution, please confirm following information when you send inquiry.
1. Lifting capacity.
2. Span length. (rail center to rail center)
3. Lifting height. (hook center to ground)
4. Do you need bus bar, rail from us?
5. Local power supply 380V 50Hz 3P?
6. Working condition: What goods to lift?
7. Drawings of working place would be appreciated.
Here I list our major products for your reference, please check:
1. LH/QD model double girder overhead crane.
2. MH model single girder gantry crane.
3. MG model double girder gantry crane.
4. BMH semi gantry crane.
5. BZ model pillar mounted jib crane.
6. CD/MD electric hoist.
7. Crane spare part: Wheels/Motors/Hook block/Control panel/Coiling block.
Audited Supplier 
){kind=link}