Casing Spacers for Casing Pipe

• Plastic Type: Thermosetting Plastic
• Plastic Form: Granule
• Molding Method: Compression Molding
• Transport Package: Carton Box
• Specification: H50
• Trademark: LV TOP
• Model NO.: 8547200000
• Origin: China
• HS Code: 8547200000
• Production Capacity: 50000

Product Description

HDPE Skid Spacers for Casing Pipe

 

Product Description

The skid spares are designed to protect pipes against the casing pipe during the pipeline go through railway, high way and constructions. The spacers are made from HDPE and fastened by nylon screws so that to devoid metal material.The runners have wheels on top and decrease the friction and allow the carrier pipe to travel through a casing with less resistance.

Detailed Photos

 

Product Parameters

Installation Instructions

How to install the runners to the tube?

• Prepare appropriate number of elements and connect them by means of clips.
• Impose circuit on the carrier pipe.
• translate through the side openings extreme skids nylon screws and washers and nuts.
• Move the circuit at the required place,
• Tighten the nuts evenly causing a tightening of the runners on the tube,
• After the establishment of the required number of circuits to be the conduit inserted into the casing pipe.

Our Advantages

APPLICATIONS

Placement of carrier pipes through casing. Casing spacers supported and positioned pipe inside a casing pipe.

Casing Insulators prevent damage to the outer coated surface of a pipeline during installation.

GENERAL FEATURES

Easy Installation: wheel rollers provide minimal coefficient of friction allowing the carrier pipe to more easily pulled through the casing.

Cathodic Protection: with low moisture absorption of the polyethylene material.

 

Casing Spacers with wheel rollers - NO METAL PARTS

 

Use two spacers back to back at the leading edge + 1.5m spacing along the pipe bore.

Nylon closing bolts

Material: HDPE

Runner Width 240 mm

Leg lengths: 32, 50, 70, 100, 160 mm, 210 mm

 

Casing spacer  models have four wheel runners to support heavy loads. Insert forces are reduced by the roller wheels.

Casing spacers for pipe through casing or ducts, position the carrier pipe in the casing with specific leg heights.

The non-conductive wheel runners provide cathodic protection.

При прокладке трубопроводов, пересекающих автотрассы, железнодорожные пути, водные преграды, трубопроводы и другие препятствия, основной трубопровод прокладывается через защитный футляр ("кожух","патрон","гильза"(труба большего диаметра)).
Кольца Спейсер монтируются на трубопровод и обеспечивают диэлектрическую изоляцию трубопроводного перехода (разделение основного трубопровода и "кожуха"), а также служат для механической защиты изоляционного покрытия трубопровода и упрощения процедуры протаскивания трубопровода через "кожух".

Кольца обеспечивают электрическую изоляцию между двумя трубами, устойчивы к химической коррозии, давлению, механическим и термическим ударам.