LT type single girder low-clearance overhead crane
Introduction
LT type single girder low-clearance overhead crane is the renew product of "LD", which is a kind of Light cranes that increase the lifting height in low roof workshops.compared with LD, it makes up for the lifting height defect of old type workshop, whose property is much superior.
Capacity of 1t~10 tons; span 7.5 -35m; working class A5; Working temperature is -25 °C to 40°C.
Specifications
Low clearance overhead crane
1.Capacity:1-10t
2.Span:7.5-35m
3.ISO 9001,ISO 14001. OHSAS 18001
Advantage
1). First class quality with competitive price
2). Compact design, optimal use of the size of work areas
3). Reasonable structure, favorable performance
4). Control the load easily and position the load exactly
5). Smooth starting and stopping
6). Superior safety and reliability
7). Low noise, commodious cabin and good view
8). Minimum& Easy maintenance, excellent exchangeability for parts and components
9). Saves electricity specifications
Some Technical Parameter
| traveling mechanism | Performance parameters |
| | 1-5t | 10t |
| Traveling Speed (m/min) | 20 | 20 |
| Reduction Ratio (i) | 38 | 38 |
| Motor | type | YES |
| power | 2×0.4 | 2×0.8 |
| Rotational speed | 1200 |
| Working System | A5 |
| Power supply | 3phrase 380V 50Hz |
| Wheel diameter | Ф200 |
| Width of Track | 37-70mm |
Technical Parameter
1. The quality of the main girder decides use age and use cost of the crane. "shengqi" consummately adopt European most advanced design and manufacture craft of the main girder. Mail girder wear well , not only let user ease use, but also low maintenance cost.
2. The up camber curve of main girder adopt optimize 4 times curve, ensure traveling have no upgrade resistance when full loading. Overcome the disfigurement of traveling motor overload traveling and trolley slide traveling.
3. End carriage is box girder, and the connection between end carriage and main girder adopt high strength bolt, in order to transport conveniently.
4. Optimize structure design, bearing layout reasonable , bear horizontal force, improve use age of the bearing.
5. The connections of every mechanical part are gears, in order to achieve simple installation and convenient maintenance. The drive wheel group and driven wheel group are all supported on crescent bearing box , convenient for disassembly and adjust.
cause this is a kind of customized product, please kindly provide us the following information:
1. Lifting capacity.
2. Span length. (rail center to rail center)
3. Lifting height. (hook center to ground)
4. Do you need bus bar, rail from us?
5. Local power supply 380V 50Hz 3P?
6. Working condition: What goods to lift?
7. Drawings of working place would be appreciated.
Audited Supplier 
){kind=link}