Full Gantry Crane
MH single beam full gantry crane is matched with CD1/MD1 model wire rope hoist. It is a kind of track travelling medium-duty class gantry crane. The capacity from 3ton to 32ton, span from 12m to 35m or others , working temperature within-20--+40 centigrade. This gantry crane is commonly used outside yard for loading/unloading and moving materials. The control is pendant push button control, cabin control or remote control. If your workshop does not have any column to support an overhead crane, the gantry crane can also be a solution.
Features
- Designed for indoor & outdoor use.
- The structure can be box type or truss type
- Equipped by electric wire rope hoist CD/MD type or Chain hoist.
- Power supply by cable reel system or bus bar
- Controlled via push button pendant/Radio remote/Cabin, separately or any combination.
- Tailored based on client's detailed requirement.
BMH type semi-gantry Crane
1). Introduction
MH type Semi-Gantry (BMH) Electric Crane forms a complete set with electric hoist, it is the best light crane, which is used both in windy area and workshop for inside and outside transition.
BMH Model semi-gantry Crane is widely installed in the place where laying the rail is not a option. It is widely used in warehouse and material yard to load and unload cargo.
BMH Model semi-gantry Crane with electric hoist is a very common type.
Inside workshop, semi-gantry is available. The top end carriage runs on runway, while bellow end carriage run on the ground. Semi-gantry crane is kind of full gantry crane, and has the same features of full gantry crane. Semi-gantry cranes are suitable solution for the area in which overhead runways are not practical,and also impossible to build double track for crane travelling.
The leg is often desianed with straight on the outside part, so that gives more hook approach.
semi-gantry crane Components:
1. Main girder
2. Saddle
3. Legs
4. Cab and ladder installation
5. Crane traveling mechanism
6. Electric wire rope hoist
7. Operate handle
8. Floor girder
9. Track and conductive device
Some Technical Parameter
| Capacity |
3, 5, 10, 16, 20t |
| Span |
14-30m |
| Lifting Height |
6-15m |
| Power Supply |
380v, 3p, 50hz |
Technical Characteristics:
1) Hard-tooth surface of reducer
2) Steel winding drum
3) Imported rope
4) Converter function of adjustable speed without contact or module
5) Intelligence controlling
6) Trinity drive
Cause this is a customized product, please provide us the following information
Capacity?
Lifting Height? (from hook to the ground)
Span?
Local Power-V-Hz-P?
Audited Supplier 
){kind=link}