| Customization: | Available |
|---|---|
| After-sales Service: | 12 Months After Delivering |
| Warranty: | 12 Months After Delivering |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
CD1 Wire Rope Hoist uses 1 hoisting conic motor as the lifting power, after 1st and 2nd reducer system, turn 1380 RPM to a 8m/min lifting speed. We foucs on "Maximum Safety" on the designing, and specially choose parts from the market. We DONOT pursuit light weight, econical Janpan "extreme limitation" designing in order for optimaztion designing. The drum adopts seamless pipe, not foundry pipe. The foundtry drum is easy to be deformed becasue of the grinding between drum and rope guide. The user has to deassemble the hoist and make repalcement which increases the cost. Our sealess drum make the rope guide replacing easily. The reducer gears and shaft are all made by our factory workshop with material of 20CrMnTi or 40Cr with heat treatment. The roughpart of gears are forged by our own mould. We DONOT make gears by the way of "unchange firber orientationuse" of Carbon steel or bar roughpart. Except electrics, bearing and standard parts, all other parts are made by ourself. Our "self processing capability" guarantee the quality of the product.
Wheel:
Follows "JB/T6392.2" rules, forged by adopting 45# carbon steel. Surface hardness is 300-380HB, and the hardness bellow 15mm is 260HB.
Gearbox:
The accurancy of the gears is not less than degree 8-8-7 of GB10095 rules. The travelling speed can be 20m/min, 30m/min, 45m/min and 75m/min.
Driving motor:
Conic motor of ZDY seriers is adopted. With the best supplier of "Nanjin Motor", this motor can meet "busy starts, busy brake, busy reverse" operation. On the back o fthe motor, there is a adjustable bolt, which can adjust the brake torque.
Safety Factor:
Each hoist is load tested by 1.25 times of static and 1.1 times of dynamic loading test before delivering
The wire rope we adopted is 3 time safety factor at least
Limit Switch:
Pedal limist switch & counter-weight limit switch give protection for lifting
Pedal limit switch gives lowering protection
Overload device prevent demage loading
In 2010, Lyfoo Industry Co., Ltd. was founded in Bejing as the daughther company of Shengqi Machinery Group. Shengqi Machinery Group is a professional crane factory with 2000 stuffs. The product covers overhead crane and gantry crane up to 900t.
In 2012, LYFOO has acquired TOYA Hoist Machinery, and start manufacturing manual hoist and electrical hoist.
In 2013, LYFOO started a cooperation with Huabei Technology University and developed the first "Patient Lift" product in China. This product got warmly welcome from the market, and it helps a lot for the disable persons to move.
In 2015, LYFOO has developed portable gantry crane. The light duty gantry crane is also called floor crane, it runs on floor and features height adjustable. We supply hundreds of units to the market with customized designing.
In 2017, LUCKY FILM GOUP has appointed LYFOO to be the exclusive distributor for their low-pressure measurement film for the International market. LUCKY is the only pressure film producers beside FUJI in the world.
In 2018, LYFOO has been funded by 35 companies from the material handling material industry and set up a "Workshop Union" project (short as WKS union). WKS union provides "Super Cost Effective" and "Super Quality Controlled" product to the market. "Workshop Union"carries out an individual QC program for the products before delivering from the factories. Thus, the product sold from "Workshop Union" will be double quality controlled. In the coming days, our offer from "Workshop Union Co., Ltd." will be terms of "EXWorkshop" rather than EXW. Surprising price will be obtained.
In 2021, LYFOO set up a new factory "LV Top Pipe Fitting Co., Ltd." and start designing and producing pipe fitting product.
){kind=link}