Top running overhead crane
1. Capacity: 1-16t
2. Span: 5-35m
3. Lifting height: 6-30m
4. Certificate: ISO 9001
Introduction
LDP type top running overhead crane, is excellent for low runway workshop. The hoist runs on top of the beam, and gives better lift height than standard single girder crane and provide substantial savings in eliminating the need for both purchase and installation of the crane rail. Two operational methods - ground or cabin (open or closed type).
AdvantagesThe quality of the main girder decides use age and use cost of the crane. "shengqi" consummately adopt European most advanced design and manufacture craft of the main girder. Mail girder wear well , not only let user ease use, but also low maintenance cost. The up camber curve of main girder adopt optimize 4 times curve, ensure traveling have no upgrade resistance when full loading. Overcome the disfigurement of traveling motor overload traveling and trolley slide traveling. End carriage is box girder, and the connection between end carriage and main girder adopt high strength bolt, in order to transport conveniently. Optimize structure design, bearing layout reasonable , bear horizontal force, improve use age of the bearing. The connections of every mechanical part are gears, in order to achieve simple installation and convenient maintenance. The drive wheel group and driven wheel group are all supported on crescent bearing box , convenient for disassembly and adjust.
| Crane traveling mechanism |
Performance parameters |
| |
1-5t |
10t |
| Traveling Speed (m/min) |
20 |
20 |
| Reduction Ratio (i) |
38 |
38 |
| Motor |
type |
YES |
| power |
2×0.4 |
2×0.8 |
| Rotational speed |
1200 |
| Working System |
A5 |
| Power supply |
3phrase 380V 50Hz |
| Wheel diameter |
Ф200 |
| Width of Track |
37-70mm |
Audited Supplier 
){kind=link}