0.25t-20t Electric Wire Rope Hoist, High Quality Hoist

• Customization: Available
• Application: Double Beam Crane, Gantry Crane, Bridge Crane, Tower Crane, Single Grinder Crane, Lifting Platform, Small Crane
• Type: Electric Hoist
• Model NO.: CD1/MD1
• Lift Speed: 8/0.8 M/Min
• Maximum Lifting Height: >20m
• Certification: CE, ISO9001:2000
• Condition: New
• Color: Optional
• Capacity: 0.25-20 Ton
• Motor: Nanjing Zongchang(Best in China)
• Hook: National Standard
• Power Supply: 380/220/415/440V 50/60Hz 3phase
• Transport Package: Wooden Box
• Specification: CE
• Trademark: LYFOOCRANE
• Origin: China
• HS Code: 84253100
• Production Capacity: 30, 000 Units Units

Product Description

CD1 Single Speed Hoist

CD1 Wire Rope Hoist (also called monorail hoist) uses 1 hoisting conic motor as the lifting power, after 1st and 2nd reducer system,  turn 1380 RPM to a 8m/min lifting speed.
Lifting Speed: 8m/min
Lifting height: 6-100m

MD1 Double Speed Hoist
 
MD1 Double Speed Hoist possess two differeent motors to provide two different speeds-one is the normal speed, the other is the 0.8m/min, to operate the work need more accuracy.

Designing Concept 

We foucs on "Maximum Safety" on the designing, and specially choose parts from the market. We DONOT pursuit light weight, econical Janpan "extreme limitation" designing in order for  optimaztion designing. 
The drum adopts seamless pipe, not foundry pipe.  The foundtry drum is easy to be deformed becasue of the grinding between drum and rope guide.  The user has to deassemble the hoist and make repalcement which increases the cost.  Our sealess drum make the rope guide replacing easily.

The reducer gears and shaft are all made by our factory workshop with material of 20CrMnTi or 40Cr with heat treatment.  The rough part of gears are forged by our own mould.    We DONOT make gears by the way of "unchange firber orientationuse" of Carbon steel or bar roughpart. 
Except electrics, bearing and standard parts, all other parts are made by ourself.   Our "self processing capability" guarantee the quality of the product.
 
 
Product Description
   Wheel: Follows "JB/T6392.2" rules, forged by adopting 45# carbon steel. Surface hardness is 300-380HB,  and the hardness bellow 15mm is 260HB.
   Reducer: The accurancy of the gears is not less than degree 8-8-7 of GB10095 rules. The travelling speed can be 20m/min, 30m/min, 45m/min and 75m/min.
   Dring motor: Conic motor of ZDY seriers is adopted.  With the best supplier of "Nanjin Motor", this motor can meet "busy starts, busy brake, busy reverse" operation. On the back o fthe motor, there is a adjustable bolt, which can adjust the brake torque. 
 
 
Safety Factor
   Each hoist is load tested by 1.25 times of static and 1.1 times of dynamic loading test        before delivering
   The wire rope we adopted is 3 time safety factor at least
   Pedal limist switch & counter-weight limit switch give protection for lifting
   Pedal limit switch gives lowering protection
   Overload device prevent demage loading




Technical Parameters
 

Type	0.25T		0.5T	1T	2T	3T	5T	10T
Capacity(ton)	0.25		0.5	1	2	3	5	10
Height	3-9		6-12	6-30	6-30	6-30	6-30	6-30
Lifting Speed(m/min)	8(8/0.8)		8(8/0.8)	8(8/0.8)	8(8/0.8)	8(8/0.8)	8(8/0.8)	7(7/0.7)
Traveling Speed(m/min)        20(30)
Type of the Wire Rope	6×19-3.6	6×37-4.8-180		6×37-7.4-180	6×37-11-155	6×37-13-170	6×37-15-200	6×37-15-200
Type of the I-Beam	16-22b	16-28b		16-28b	20a-32c	20a-32c	25a-63c	28a-63c
Minimum radius of the circular rail	0.8	1.5		1.5-4	2-4	2-4	2.5-5	3.5-9
Power	380v 50Hz 3 phrase(we can produce the 220-440v, 50hz-60hz according to your request)