PT-3 Adjustable Manual Gantry 1000kg
In many places, especially some confined place, where the general overhead crane or gantry crane is not applicalbe, the manual gantry crane is a very useful sololution. It is a light duty, easy installation, easy operation equippment.
Applications: assembly workshop, machine tool workshop, mould assembly, research laboratory, maintenance workshop, small freight station, warehouse, garage, etc., especially for customers with load walking conditions
We provide 3 type of height adjusted gantry:
1. Lever raise model:
Two(2) levers are installed on both side, and it is more compact and convinient to raise the beam. It is most popular among our clients.
2.Winch raise model:
By using 2 sets of winch on both side of the leg, the beam can be raised by different height accoring to the requirement.
3. Turbine raise model:
This is a patend designing from our company, and it is the only designing among our competitors all around the world. The raising is precisely by mm and can be raised to any point according to the site situation. In many cases, the user can raise the beam as close as possible to the roof, then, give a maximum of lift height than any other lifting equippment.
Some Technical Parameter
Type |
Capacity(t) |
Height(m) |
Span(m) |
Beam(mm) |
PT3-0.5 |
0.5 |
3-9m |
3-9m |
140 |
PT3-1 |
1 |
160 |
PT3-2 |
2 |
160 |
PT3-3 |
3 |
200 |
PT3-5 |
5 |
250 |
Assemble and Disamemble
1. Bolt connection
All loose parts are connected by high-strength bolts. 2 worker can assemble them at site easily.
2. Nut embeded design
Ground beam has a nut embeded designing. This makes the assemble work very simple. All bolts and nuts are matched perfectly.
3. Span alternative
Clinet can order differnet span of beams to meet the same legs. It can be assembled according to different working site.
4. Other features
Heavy-Duty Casters: Four-position, swivel-lock casters with moldon polyurethane wheels for excellent floor protection.